Honda HDS Guide

Honda HDS USB-to-serial RS232 adapter

July 5, 2012 disonlu007 Honda HDS Guide

USB-to-serial RS232 adapter for the Honda Diagnostic System HDS Introduction This appendix is for users of the Honda Diagnostic System (HDS) software on a PC with the Honda Interface Module (HIM) and a computer that has a USB port, but does not have an RS-232 DB 9-pin male serial port. A USB-to-serial adapter may be […]

More

Honda HDS connect Scan Tool

July 3, 2012 disonlu007 Honda HDS Guide

Honda HDS connect Scan Tool HIM connect HDS Tablet and Vehicle HIM connect HDS Tablet HIM connect HDS Laptop HIM connect HDS Laptop and Vehicle GNA600 connect HDS Laptop and Vehicle GNA600 connect HDS Laptop GNA600 connect HDS Tablet

More

Drive Recorder Information

July 2, 2012 disonlu007 Honda HDS Guide

Drive Recorder Information The total number of files stored on the HIM is 2Mb in total. If not enough storage space remains on the HIM when a capture is triggered, the HIM places itself in suspend mode when the trigger is activated. The sizes of the files vary depending on the capture requirements, including control […]

More

High-Speed Sampling

July 2, 2012 disonlu007 Honda HDS Guide

High-Speed Sampling When setting the parameter trigger type, you can select the number of parameters from one to ten. This increases the resolution to capture more detailed changes in values. When capturing data in normal mode, the data from the vehicle is sampled approximately two times per second; when in highspeed sampling mode, the samples […]

More

Honda HDS System Button Functionality

July 2, 2012 disonlu007 Honda HDS Guide

Honda HDS System Button Functionality 1. On the right-hand side are the system buttons that allow various operations: Parameter Configuration: This displays the list of parameters and allows them to be included or removed from the display. It also allows parameters to be selected as line graph displays. Return to Normal Display: Select this button […]

More

Honda HIM Lights and Their Meanings

July 2, 2012 disonlu007 Honda HDS Guide

Honda HIM Lights and Their Meanings The HIM tool indicator lights 1, 2, or 3 will flash a specific color sequence to indicate the state of the system. For example, the (1) green and (2) yellow lights flashing together indicate the system is in Idle state. HIM Tool HIM Tool Light Sequence Chart 15s

More

View Captured Files

July 2, 2012 disonlu007 Honda HDS Guide

View Captured Files 1. From the main screen, enter stand-alone mode by clicking on the icon, and select Drive Recorder from the menu. 2. Disconnect the HIM from the vehicle, and connect it to external power using a 110 VAC/12 VDC power supply, part number VET02001723. Connect the Ethernet cable to both ports on the […]

More

Honda HDS Update HIM

July 2, 2012 disonlu007 Honda HDS Guide

Honda HDS Update HIM 1. If the software level in the HIM is not the latest version, the HDS tablet automatically recognizes that it is out-of-date and launches the HIM reprogramming application. If the software version is up-to-date, then the application proceeds directly to Set the Capture Trigger Type. 2. Press and hold the green […]

More

Set the Capture Trigger Type

July 2, 2012 disonlu007 Honda HDS Guide

Set the Capture Trigger Type 1. If previously captured files are stored in the HIM, they need to be saved to the tablet tester before further captures can be made. You can select Yes to save the captures, and then continue on to make new captures. Or you can select No to delete the stored […]

More

Connect Honda HDS and Honda HIM

July 2, 2012 disonlu007 Honda HDS Guide

Connect Honda HDS and Honda HIM 1. From the Mode Menu screen, select Drive Recorder. 2. Turn the ignition switch to ON (II), disconnect the DLC cable from the tester, and connect the DLC cable from the HIM to the vehicle. 3. Connect the Ethernet cable into the Ethernet port on both the HDS tablet […]

More

© 2017 Honda Motors.