Honda HDS Operation Guide

Request Vehicle Information

July 3, 2012 disonlu007 OBD Scantool Software Guide

Mode $9: Request Vehicle Information This service enables vehicle specific information such as Vehicle Identification Number (VIN) and Calibration ID’s to be obtained. Some of this information may be required by regulations, and some may be desirable to be reported in a standard format if supported by the vehicle manufacturer. If the vehicle supports In-use […]

More

Request Control of On-Board System, Test or Component

July 3, 2012 disonlu007 OBD Scantool Software Guide

Mode $8: Request Control of On-Board System, Test or Component This service is currently unavailable and cannot be selected. This service would allow the control of an on-board system, test or component operation, however, the provision of such functionality is left to the vehicle manufacturer to implement. An optional feature of this service is for […]

More

Request On-Board Monitoring Test Results for Continuously Monitored Systems

July 3, 2012 disonlu007 OBD Scantool Software Guide

Mode $7: Request On-Board Monitoring Test Results for Continuously Monitored Systems This service enables "pending" emission-related DTC’s to be obtained. "Pending" DTC’s are those detected during the current or last completed drive cycle under normal driving conditions. This service is required for all DTC’s and is independant of Service 3 ("Confirmed" DTC’s). This service is […]

More

Request On-Board Monitoring Test Results for Non-Continuously Monitored Systems

July 3, 2012 disonlu007 OBD Scantool Software Guide

Mode $6: Request On-Board Monitoring Test Results for Non-Continuously Monitored Systems This service provides access to the results for on-board diagnostic monitoring tests of specific components/systems that are not coninuously monitored e.g. Catalyst Monitoring, Evaporative System monitoring, etc. This service may also be used as an alternative to Mode $5 to report Oxygen Sensor test […]

More

Request Oxygen Sensor Monitoring test Results

July 3, 2012 disonlu007 OBD Scantool Software Guide

Mode $5: Request Oxygen Sensor Monitoring test Results This service provides access to the on-board oxygen sensor test results as required by OBD regulations. Use of this mode is optional, depending on the method used by the vehicle manufacturer to comply with the requirement for oxygen sensor monitoring. Upon selection of this service the tool […]

More

Clear Reset Emission-related Diagnostic Information

July 3, 2012 disonlu007 OBD Scantool Software Guide

Mode $4: Clear/Reset Emission-related Diagnostic Information This service provides a means to command on-board modules to clear all emission-related diagnostic information. This includes the following: Count of Diagnostic Trouble Codes. Diagnostic Trouble Codes. Trouble Code causing Freeze Frame data. Clear Oxygen Sensor test data. Reset status of on-board Monitoring tests. Clear On-board Monitoring test results […]

More

Request Emission-related Powertrain Diagnostic Trouble Codes

July 3, 2012 disonlu007 OBD Scantool Software Guide

Mode $3: Request Emission-related Powertrain Diagnostic Trouble Codes This service enables "confirmed" emission-related DTC’s to be retrieved from the vehicle under test. If no trouble codes are stored then each module whose address is listed in the "DTC Summary" table, will have an associated count of zero (Number of DTCs). The displays will be continuously […]

More

Request Powertrain Freeze Frame Data

July 3, 2012 disonlu007 OBD Scantool Software Guide

Mode $2: Request Powertrain Freeze Frame Data This service provides access to emission related data values within a Freeze Frame. Selecting Frame Number 0, the default frame, will cause any mandated freeze frame data to be displayed. Selecting any other frame number will cause manufacturer specific freeze frame data to be displayed (if any is […]

More

Request Current Powertrain Diagnostic Data

July 3, 2012 disonlu007 OBD Scantool Software Guide

Mode $1: Request Current Powertrain Diagnostic Data This service provides access to current emission related data values, including analog/digital inputs and outputs, and system status information. Upon initial selection of this service, a list of all emission-related data supported by the vehicle under test is generated. A progress bar will be displayed during this time. […]

More

Honda HDS connect Scan Tool

July 3, 2012 disonlu007 Honda HDS Guide

Honda HDS connect Scan Tool HIM connect HDS Tablet and Vehicle HIM connect HDS Tablet HIM connect HDS Laptop HIM connect HDS Laptop and Vehicle GNA600 connect HDS Laptop and Vehicle GNA600 connect HDS Laptop GNA600 connect HDS Tablet

More

« Previous Posts Next posts »

© 2017 Honda Motors.