Request On-Board Monitoring Test Results for Non-Continuously Monitored Systems

July 3, 2012 OBD Scantool Software Guide

Mode $6: Request On-Board Monitoring Test Results for Non-Continuously Monitored Systems

OBD Scantool toolbar


This service provides access to the results for on-board diagnostic monitoring tests of specific components/systems that are not coninuously monitored e.g. Catalyst Monitoring, Evaporative System monitoring, etc. This service may also be used as an alternative to Mode $5 to report Oxygen Sensor test results.

Select All

Upon initial selection of this service, a list of all reported on-board monitoring test results is generated. A progress bar will displayed during this time. Upon completion, the "ECU Modules" list box is populated with the addresses of the modules found.

If data is available for a single ECU only then that data will be displayed immediately. If data is available across multiple ECU’s then the user is required to select which ECU(s) to display the data for either by selecting the required item from the "ECU Modules" list or by pressing the "Select All" button. ECU data may be deselected either by reselecting the required item within the "ECU Modules" list or by pressing the "Clear All" button.

 

Note: Test results are displayed against either a Minimum or a Maximum limit. A dashed line "—" indicates that the limit is not applicable

  • The Help button provides a shortcut to this help topic. Contextual Help

Mode $1: Request Current Powertrain Diagnostic Data
Mode $2: Request Powertrain Freeze Frame Data
Mode $3: Request Emission-related Powertrain Diagnostic Trouble Codes
Mode $4: Clear/Reset Emission-related Diagnostic Information
Mode $5: Request Oxygen Sensor Monitoring test Results
Mode $7: Request On-Board Monitoring Test Results for Continuously Monitored Systems
Mode $8: Request Control of On-Board System, Test or Component
Mode $9: Request Vehicle Information

Comments are currently closed.


© 2017 Honda Motors.